Home / Tools

Tools on this site

Vibration, temperature, and the work order. Here.

These tools run on this page. They are samples, not a live customer machine. A real sensor, a baseline, an alert, and a work order stay together in the platform.

On this page

Four tools. No other site.

Axes, spectrum, temperature, and a work order. The traces below are generated here so you can see the shape of a reading. They are not a connected sensor.

Axes

X, Y, and Z, plus RMS and peak, in mm/s. The same values a MachBeat packet carries.

Spectrum

A frequency view of the same sample. A peak in the plot is not a fault call. Fault calls need the machine, the speed, and a baseline.

Temperature

A sample temperature trace in °C, next to the vibration. Heat alone is not a diagnosis.

—

Work order

When a reading needs a person, MachBeat keeps the job on the same machine. This card is a sample of that record.

Order
WO-SAMPLE
Asset
Sample motor
Priority
High
Status
Open
Task
Inspect the drive-end bearing and lubrication.
Run it in the simulator →

Engineering limits follow machine class and mounting. Example bands such as 2.8 / 4.5 / 7.1 mm/s are examples, not a limit for every machine. Platform is where a real machine is scored.

Put the reading on a real machine.

A pilot mounts the sensor, captures a baseline, and shows the alert and the work order on your asset.